![](https://www.machsystems.cz/wp-content/uploads/2020/10/smartview-big.jpg)
Smartview is a compact panel with a color display, CAN bus, and multiple inputs and outputs. The display offers 16 inputs, 6 outputs, 5 LED indicators, 3 pushbuttons, and is fully programmable.
In space-limited applications, it is the best solution for displaying information of any machinery or process. If you are searching for an economic solution with a high performance and flexibility, go for the Smartview.
Technical specification:
- Fully programmable
- 1 x CANBUS 2.0 type A and type B up to 1Mbps (ISO 11898 standard)
- Inputs
- 12 x Digital (active high or low software set-table)
- 2 x Analogue (resistor type)
- 2 x Frequency type
- Outputs:
- 4 protected high-side 2,5 A (if used all outputs, max. load for each is 750 mA)
- 2 protected low-side 2,5 A
- 5 LED indicators, 3 push-buttons
- Operating voltage: 8 – 32 V DC, reversed polarity protection
- Operating temperature: from -20°C to +70°C
- Dimension 105 x 65 x 41 mm
- Protection: IP67
- CPU: 16 bit Spansion microcontroller
- Memory:
- FLASH 256,5 + 32 KB
- RAM 16KB
- LCD TFT display:
- Format 2,4″
- Resolution 240 x 320px
- Orientation landscape or portrait
- Backlight LED 950cd/m²
- Contrast ratio 500
- buzzer 80dB with 30 mm diameter
- programmable in C
- CAN bootloader for firmware upgrade