Gateways and Bus Converters

A 4-channel SAE J2716 bus (SENT bus) interface, gateway, and stand-alone data logger. The converter features 4 SENT channels, 10/100 Ethernet port, CAN(/FD) channel, a USB port, multiple I/Os, and a microSD card slot. The device can be easily configured over its web server, and a free-of-charge PC application can be used for advanced functions such as real-time data logging. An open communication protocol for integration is also available.

The SENT-USB is a two-channel SAE J2716 (Single Edge Nibble Transmission – SENT) to USB interface that easily connects a SENT bus to any computer with an USB port. The converter is powered from USB and features two bi-directional SENT channels and an USB virtual COM port. A free-of-charge application for simulation and monitoring of the SENT communication is provided.

SAE J2716 (SENT) to RS-232/CAN bus Gateway/Interface offers two bi-directional SENT channels, two analogue channels, and either a RS-232 or CAN bus interface. Each SENT channel supports reception and transmission of SENT frames and all SENT communication parameters are configurable. Fast, Short Serial a Enhanced Serial Messages are supported. Device configuration can be stored into an on-board non-volatile memory. A free-of-charge PC application is provided for device configuration, reception and transmission of Fast and Slow frames. The open communication protocol provides for integration into existing systems.

The MACH-ETH is an automotive network interface that features one Ethernet port, two CAN FD channels, a LIN channel, a USB and RS-232 port, and multiple I/Os. The device can act as an Ethernet-CAN(/FD), Ethernet-LIN, USB-CAN(/FD) and USB-LIN interface as well as CAN(/FD)-LIN gateway, and a user-scripting feature allows to run user applications directly on the device. The open communication protocol enables access to CAN(/FD) and LIN channels over Ethernet, USB, RS-232, and to transmit/receive frames.

The LIN to CAN/RS-232 Gateway can be used to interface LIN bus to CAN or RS-232. It can act as both LIN Master and Slave and both LIN v1.x and v2.x are suuported. The converter is available in two variants - LIN to CAN and LIN to RS-232.

A user-programmable converter/interface/data-logger that features two CAN(/FD) channels, a LIN channel, and a RS-232 port. The converter offers a USB port, a microSD card slot and multiple digital/analogue inputs and outputs, which makes it suitable for a broad range of use-cases such as protocol conversion, network bridging, data logging, rest-bus simulation, and external peripheral control and monitoring.

A 10BASE-T1S switch with CAN(/FD) gateway and user programming features. The device offers one 10BASE-T1S port, one Fast Ethernet port, a CAN channel with CAN FD support, and a USB 2.0 port. The Single-Pair Ethernet 10BASE-T1S port supports both CSMA/CD and PLCA modes, and allows for point-to-point and multi-drop network topologies. The port configuration, such as mode, BEACON transmission (PLCA coordinator), Node ID / Node count, and bus termination, can be easily set by on-board DIP switches.

The 100BASE-T1 USB Interface (Media Converter) connects a 100BASE-T1 network to any computer with an USB port. The converter acts as an Ethernet network interface card when plugged into an USB port. The interface easily connects Automotive Ethernet devices with OPEN Alliance BroadR-Reach (OABR) port, such as cameras or ECUs, directly to any PC without a need of an on-board network card. The device can also be used as a USB-CAN interface.

Configurable Automotive Ethernet switch with frame sniffing/forwarding (Active TAP) function and Ethernet-to-CAN(/FD) gateway function. 3x 100BASE-T1, 1x Gigabit Ethernet, 2x CAN(/FD), LIN bus, USB, MicroSD card slot, 2x Digital output, 2x Analogue input. User-programmable firmware.

A bi-directional media converter between 100BASE-T1 (BroadR-Reach / Automotive Ethernet) and 100BASE-TX (Fast Ethernet), OABR Master/Slave configuration, physical layer conversion, access to PHYs SMI registers over virtual serial port or CAN bus, IEEE 802.3bw compliant. The device can also be used as a USB-CAN interface.

The 100/1000BASE-T1 USB Interface MATEnet realizes a connection between a 1000BASE-T1/100BASE-T1 network and USB 3.1 port. The device acts as a standard network interface card and features TE MATEnet and USB 3.1 Type-C connectors. The interface is an ideal tool for connecting a 100BASE-T1/1000BASE-T1 ECU or network to a computer or laptop without an internal network card, such as ultrabooks, mini PCs etc.

Fast/Gigabit Automotive Ethernet to Standard Ethernet media converter with TE MATEnet connector that supports both 100BASE-T1 and 1000BASE-T1 full-duplex single-pair Ethernet standards. USB port for configuration, status information, and port/cable diagnostic. The device can also be used as a USB-CAN(/FD) interface.

Fast/Gigabit Automotive Ethernet to Standard Ethernet media converter with Rosenberger H-MTD connector that supports both 100BASE-T1 and 1000BASE-T1 full-duplex single-pair Ethernet standards. USB port for configuration, status information, and port/cable diagnostic. The device can also be used as a USB-CAN(/FD) interface.